Thursday, January 26, 2017

TTL-485-5P(5V TTL to RS-485 Converter)

TTL-485-5P(5V TTL to RS-485 Converter)


Model : TTL-485-5P

TTL-485-5P is a bi-directional port powered RS-485 to 5V TTL converter in a 9 pin format. It can convert any standard full duplex RS-485 port to a 5V TTL signal and vice versa. The unit is powered from the RS-485 data lines. It also supports data direction auto-turnaround. Therefore, no external power or flow control is required. The data direction auto-turnaround automatically enables the TTL driver when data is present on the RS-485 side making the device plug-and-play, requiring no software drivers. The TTL-485-5P has a DB9 male connector on the RS485 side or 5-way terminal block and either a DB9 male connector or 5-way terminal block on the TTL side. Separate terminal block is included in package.

    Features
    1.Port Powered: 5VDC external power is necessary
    2.Data Direction, auto-turnaround, no flow control is necessary
    3.Plug-and-Play (Device is hot-pluggable)
    4.Built-in surge protection, static protection and circuit protection

    Specification
    Standards: EIA RS-485 standard
    RS-485 signal: D+, D-, GND
    TTL signal: IN, OUT, GND
    Baud rate: 300~115200bps
    Transfer distance: 5V TTL side: 3m
    RS-485 side: 1.2Km
    Connectors: RS-485 Side: DB9 Male or 5 Way Terminal Block
    5V TTL Side: DB9 Male or 5 Way Terminal Block
    Port protect: 600W surge protection, 15KV ESD protection
    Power
    Power: 5V external power
    Environment
    Operating temperature: -10°C to 60°C
    Storage temperature: -40°C to 85°C
    Humidity: 5% to 95%(no condensation)
    Appearance
    Dimensions: 62.8mm×33.8mm×17.8mm
    99.8mm×34.1mm×17.6mm (with terminal block)
    Weight: 24g (with terminal block: 50g)

No comments:

Post a Comment