photo booth kiosk with printer and camera for events weddings

New Design photo booth case portable photo booth kiosk with printer and camera for events weddings

Feature of Smart software : 

1. With wifi connect internet.

2.Support send photo to phone

3. Support send photo to Email

4.Support upload photo to Facebook

5. White and black & colorful option.

6. Support design your own graphics and strips

7.Record video for more than 1 min.

8.Support 4 different language:English, Spanish, Polish and French.

Features:
1.Many language Settings. (Such as: English,Polish ,Spanish,French,Portuguese etc.).
2.Setting the count down when you take a photo, (Ready, 1,2,3 setting as your like).
3.Designed with air bleeder first care your devices.

4.Noble elegant, fit at night, performances and other social occasions.

Touch Screen Photo Booth Kiosk

Specificatio n: Model Number MT-520 Material Strong Steel Panel Dimension 168*45*60cm Full Set 30KG  Type  Portable with four wheels on the bottom, can separate into 3 parts. Touch Screen 21.5 inch Camera Canon 700D DSLR/EOS Camera with 18 megapixels Printer Hiti Thermal Printer P520L Works with Thermal paper and ribbon, the ribbon is instead of the ink, so on need ink. Print speed: 7-12 secs per photo, it can be printed about 300-480 photos per hour. Record Video Support Wifi Support Software Social Butterfly software, supports 4 different language: English, Spanish, Polish and French Supports share photos via facebook and mail, Supports more than 1 min video record. Packing Bubble pack + protect films + standard carton + wooden cases Color Black/white Usage Wedding, shopping mall, party, events, rent, photography studio, tourist place.

Bullet CCTV Camera and Dome CCTV Cameras

Bullet CCTV Camera and Dome CCTV Cameras

Bullet Cameras

Bullet security cameras are a type video surveillance camera that are typically small and shaped like a rifle bullet shell or lipstick case. Smaller bullet cameras are typically the diameter of a cigar, but they are shorter. Sometimes they are referred to as lipstick cameras. Bullet cameras can easily mount to ceilings or walls because most of them use a tri-axis type of mount.

Dome Cameras

Dome Security Cameras are named for their dome like shape.Dome cameras are commonly used in surveillance systems inside of homes, casinos, retail stores, and restaurants. This is because dome cameras are more fashionable and blend in very well to their surroundings. Because of their dome shape, it is difficult for someoneto tell whichdirection the lens of a Dome Camera is actually aiming. 

Mootek CCTV Cameras Dealers | Dome Camera | Bullet Cameras

We are leading in manufacturing and supplier of CCTV Cameras Chennai,Tamilnadu,India.
Our company is well known in the market for offering our clients a wide range of CCTV .  These industrial panel pcs have unique features, designs and specifications. Moreover these are available at competitive prices.

Bullet Cameras :

Bullet security cameras are a type video surveillance camera that are typically small and shaped like a rifle bullet shell or lipstick case. Smaller bullet cameras are typically the diameter of a cigar, but they are shorter. Sometimes they are referred to as lipstick cameras. Bullet cameras can easily mount to ceilings or walls because most of them use a tri-axis type of mount.

Dome Cameras:

Dome Security Cameras are named for their dome like shape.Dome cameras are commonly used 

in surveillance systems inside of homes, casinos, retail stores, and restaurants. This is because 

dome cameras are more fashionable and blend in very well to their surroundings. Because of their

dome shape, it is difficult for someone to tell which direction the lens of a Dome Camera is 

actually aiming. 

Secuirity Dome Cameras

Secuirity Dome Cameras 

Dome Cameras : 
Dome Security Cameras are named for their dome like shape.Dome cameras are commonly used in surveillance systems inside of homes, casinos, retail stores, and restaurants. This is because dome cameras are more fashionable and blend in very well to their surroundings. Because of theirdome shape, it is difficult for someone to tell which direction the lens of a Dome Camera is actually aiming. 

Security CCTV Cameras

                              CCTV Bullet and Dome Cameras

Bullet Cameras
Bullet security cameras are a type video surveillance camera that are typically 
small and shaped like a rifle bullet shell or lipstick case. Smaller bullet cameras are typically the diameter of a cigar, but they are shorter. Sometimes they are referred to as lipstick cameras. Bullet cameras can easily mount to ceilings or walls because most of them use a tri-axis type of mount.

Dome Cameras
Dome Security Cameras are named for their dome like shape.Dome cameras are commonly used 
in surveillance systems inside of homes, casinos, retail stores, and restaurants. This is because 
dome cameras are more fashionable and blend in very well to their surroundings. Because of their
dome shape, it is difficult for someoneto tell which direction the lens of a Dome Camera is 

actually aiming. 

64 Channels Digital Video Optical Transceiver - SWV66400

             64 Channels Digital Video Optical Transceiver

Model : SWV66400

3onedata digital video optical transceivers SWV66400 series can simultaneously transmit 64 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

Features
1.8-bit digitally encoded and non-compression broadcast quality video transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3.Support any high-resolution video signal
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required
8.Special ASIC design
9.Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
10.Hot-swap function
11.Stand-alone type or card-type installed in 19"4U rack-mount chassis


Specification
Technical Specification
Video channels：64 channels
Video bandwidth：8 MHz
Automatic compatible video system：PAL, NTSC, SECAM
Video input/output impedance：75 Ω(unbalance)
Video signal-to-noise ratio：≥67dB
Differential gain：(10%-90%APL) DG <1% ( typical value)
Differential phase：(10%-90%APL) DP <0.7° ( typical value)
Video connector：BNC
Fiber-optic Specification
F/O connector: FC/ST/SC
TX ：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
RX：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
Transmission Distance :20KM (single mode)
Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
Specification of custom-made options
1. Data
Connector: Terminal Blocks
Encoded type : RS485 / RS422 / RS232 / Manchester
Data rate : 0 - 400Kbps
BER:  ≤10-9
2. Audio
Connector: Terminal Blocks
Audio input / output impedance :600Ω(Balance/ unbalance)
Audio input / output voltage :2Vp-p ( typical value)
Audio input / output level :0dBm ( typical value)
Video bandwidth:10HZ~12KHZ
Audio digital encoded bandwidth :24bit
Audio signal-to-noise ratio: S/N≥95dB  (weighted)
3. Telephone
Connector: RJ11
Bandwidth :8KHZ
Features：Support call-showing function ;support H-F
Operating mode : Point to point hotline mode / FXS-FXO
4. Ethernet
Connector: RJ45
Support mode : Half duplex or Full duplex
Standards：IEEE802.3
Data rate : 10M / 100Mbps
Bandwidth: 25M
Characteristic
Dimensions: 48.3(L)×22(W)×4.4(H) cm(19”4U)
Operating Voltage: AC96-240V
Operating Temperature: -10°C to +65°C
Storing Temperature: -45°C to +85°C
Humidity: 0 to 95% non-condensing
MTBF: ≥10 5 hours

www.mootek.in

64 Channels Digital Video Optical Transceiver

www.mootek.in              16 Channels Digital Video Optical Transceiver

Model : SWV66400

3onedata digital video optical transceivers SWV66400 series can simultaneously transmit 64 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

Features
1.8-bit digitally encoded and non-compression broadcast quality video transmission
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3.Support any high-resolution video signal
4.Automatic compatible PAL, NTSC and SECAM video system
5.Power supply and other parameter state indication, which can monitor the operation condition of system
6.Support no-damage regenerative trunk of video
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required
8.Special ASIC design
9.Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
10.Hot-swap function
11.Stand-alone type or card-type installed in 19"4U rack-mount chassis


Specification
Technical Specification
Video channels：64 channels
Video bandwidth：8 MHz
Automatic compatible video system：PAL, NTSC, SECAM
Video input/output impedance：75 Ω(unbalance)
Video signal-to-noise ratio：≥67dB
Differential gain：(10%-90%APL) DG <1% ( typical value)
Differential phase：(10%-90%APL) DP <0.7° ( typical value)
Video connector：BNC
Fiber-optic Specification
F/O connector: FC/ST/SC
TX ：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
RX：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
Transmission Distance :20KM (single mode)
Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
Specification of custom-made options
1. Data
Connector: Terminal Blocks
Encoded type : RS485 / RS422 / RS232 / Manchester
Data rate : 0 - 400Kbps
BER:  ≤10-9
2. Audio
Connector: Terminal Blocks
Audio input / output impedance :600Ω(Balance/ unbalance)
Audio input / output voltage :2Vp-p ( typical value)
Audio input / output level :0dBm ( typical value)
Video bandwidth:10HZ~12KHZ
Audio digital encoded bandwidth :24bit
Audio signal-to-noise ratio: S/N≥95dB  (weighted)
3. Telephone
Connector: RJ11
Bandwidth :8KHZ
Features：Support call-showing function ;support H-F
Operating mode : Point to point hotline mode / FXS-FXO
4. Ethernet
Connector: RJ45
Support mode : Half duplex or Full duplex
Standards：IEEE802.3
Data rate : 10M / 100Mbps
Bandwidth: 25M
Characteristic
Dimensions: 48.3(L)×22(W)×4.4(H) cm(19”4U)
Operating Voltage: AC96-240V
Operating Temperature: -10°C to +65°C
Storing Temperature: -45°C to +85°C
Humidity: 0 to 95% non-condensing
MTBF: ≥10 5 hours

FOR ANY ENQUIRY 9941522520

16 Channels Digital Video Optical Transceiver

                 16 Channels Digital Video Optical Transceiver

Model : SWV61600

3onedata digital video optical transceivers SWV61600 series can simultaneously transmit 16 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

Features
1.8-bit digitally encoded and non-compression broadcast quality video transmission 
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3.Support any high-resolution video signal  
4.Automatic compatible PAL, NTSC and SECAM video system 
5.Power supply and other parameter state indication, which can monitor the operation condition of system 
6.Support no-damage regenerative trunk of video 
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required 
8.Special ASIC design
9.Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
10.Hot-swap function 
11.Stand-alone type or card-type installed in 19"4U rack-mount chassis
 
Specification
Technical Specification
Video channels：16 channels
Video bandwidth：8 MHz
Automatic compatible video system：PAL, NTSC, SECAM
Video input/output impedance：75 Ω(unbalance)
Video signal-to-noise ratio：≥67dB
Differential gain：(10%-90%APL) DG <1% ( typical value)
Differential phase：(10%-90%APL) DP <0.7° ( typical value)
Video connector：BNC
Fiber-optic Specification
F/O connector: FC/ST/SC
TX ：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm 
RX：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
Transmission Distance :20KM (single mode)
Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
Specification of custom-made options
1. Data
Connector: Terminal Blocks
Encoded type : RS485 / RS422 / RS232 / Manchester
Data rate : 0 - 400Kbps
BER:  ≤10-9
2. Audio
Connector: Terminal Blocks
Audio input / output impedance :600Ω(Balance/ unbalance)
Audio input / output voltage :2Vp-p ( typical value)
Audio input / output level :0dBm ( typical value)
Video bandwidth:10HZ~12KHZ
Audio digital encoded bandwidth :24bit
Audio signal-to-noise ratio: S/N≥95dB  (weighted)
3. Telephone
Connector: RJ11
Bandwidth :8KHZ
Features：Support call-showing function ;support H-F
Operating mode : Point to point hotline mode / FXS-FXO
4. Ethernet
Connector: RJ45
Support mode : Half duplex or Full duplex
Standards：IEEE802.3 
Data rate : 10M / 100Mbps 
Bandwidth: 25M
Characteristic
Dimensions: 48.3(L)×22(W)×4.4(H) cm(19”1U)
Operating Voltage: AC96-240V 
Operating Temperature: -10°C to +65°C
Storing Temperature: -45°C to +85°C
Humidity: 0 to 95% non-condensing
MTBF: ≥10 5 hours

8 Channels Digital Video Optical Transceiver

               8 Channels Digital Video Optical Transceiver

Model : SWV60800

3onedata digital video optical transceivers SWV60800 series can simultaneously transmit 8 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

Features
1.8-bit digitally encoded and non-compression broadcast quality video transmission 
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3.Support any high-resolution video signal  
4.Automatic compatible PAL, NTSC and SECAM video system 
5.Power supply and other parameter state indication, which can monitor the operation condition of system 
6.Support no-damage regenerative trunk of video 
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required 
8.Special ASIC design
9.Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
10.Hot-swap function 
11.Stand-alone type or card-type installed in 19"4U rack-mount chassis
 
Specification
Technical Specification
Video channels：8 channels
Video bandwidth：8 MHz
Automatic compatible video system：PAL, NTSC, SECAM
Video input/output impedance：75 Ω(unbalance)
Video signal-to-noise ratio：≥67dB
Differential gain：(10%-90%APL) DG <1% ( typical value)
Differential phase：(10%-90%APL) DP <0.7° ( typical value)
Video connector：BNC
Fiber-optic Specification
F/O connector: FC/ST/SC
TX ：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm 
RX：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
Transmission Distance :20KM (single mode)
Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
Specification of custom-made options
1. Data
Connector: Terminal Blocks
Encoded type : RS485 / RS422 / RS232 / Manchester
Data rate : 0 - 400Kbps
BER:  ≤10-9
2. Audio
Connector: Terminal Blocks
Audio input / output impedance :600Ω(Balance/ unbalance)
Audio input / output voltage :2Vp-p ( typical value)
Audio input / output level :0dBm ( typical value)
Video bandwidth:10HZ~12KHZ
Audio digital encoded bandwidth :24bit
Audio signal-to-noise ratio: S/N≥95dB  (weighted)
3. Telephone
Connector: RJ11
Bandwidth :8KHZ
Features：Support call-showing function ;support H-F
Operating mode : Point to point hotline mode / FXS-FXO
4. Ethernet
Connector: RJ45
Support mode : Half duplex or Full duplex
Standards：IEEE802.3 
Data rate : 10M / 100Mbps 
Bandwidth: 25M
Characteristic
Dimensions: 19.2(L)×17.3(W)×2.8(H) cm
Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
Operating Temperature: -10°C to +65°C
Storing Temperature: -45°C to +85°C
Humidity: 0 to 95% non-condensing
MTBF: ≥10 5 hours

4 Channels Digital Video Optical Transceiver

                  4 Channels Digital Video Optical Transceiver

Model : SWV60400

3onedata digital video optical transceivers SWV60400 series can simultaneously transmit 4 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

Features
1.8-bit digitally encoded and non-compression broadcast quality video transmission 
2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
3.Support any high-resolution video signal  
4.Automatic compatible PAL, NTSC and SECAM video system 
5.Power supply and other parameter state indication, which can monitor the operation condition of system 
6.Support no-damage regenerative trunk of video 
7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required 
8.Special ASIC design
9.Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
10.Hot-swap function 
11.Stand-alone type or card-type installed in 19"4U rack-mount chassis
 
Specification
Technical Specification
Video channels：4 channels
Video bandwidth：8 MHz
Automatic compatible video system：PAL, NTSC, SECAM
Video input/output impedance：75 Ω(unbalance)
Video signal-to-noise ratio：≥67dB
Differential gain：(10%-90%APL) DG <1% ( typical value)
Differential phase：(10%-90%APL) DP <0.7° ( typical value)
Video connector：BNC
Fiber-optic Specification
F/O connector: FC/ST/SC
TX ：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm 
RX：Power:-15 ~ -8dBm   Sensitivity :≤-35dBm
Transmission Distance :20KM (single mode)
Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)
Specification of custom-made options
1. Data
Connector: Terminal Blocks
Encoded type : RS485 / RS422 / RS232 / Manchester
Data rate : 0 - 400Kbps
BER:  ≤10-9
2. Audio
Connector: Terminal Blocks
Audio input / output impedance :600Ω(Balance/ unbalance)
Audio input / output voltage :2Vp-p ( typical value)
Audio input / output level :0dBm ( typical value)
Video bandwidth:10HZ~12KHZ
Audio digital encoded bandwidth :24bit
Audio signal-to-noise ratio: S/N≥95dB  (weighted)
3. Telephone
Connector: RJ11
Bandwidth :8KHZ
Features：Support call-showing function ;support H-F
Operating mode : Point to point hotline mode / FXS-FXO
4. Ethernet
Connector: RJ45
Support mode : Half duplex or Full duplex
Standards：IEEE802.3 
Data rate : 10M / 100Mbps 
Bandwidth: 25M
Characteristic
Dimensions: 19.2(L)×17.3(W)×2.8(H) cm
Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
Operating Temperature: -10°C to +65°C
Storing Temperature: -45°C to +85°C
Humidity: 0 to 95% non-condensing
MTBF: ≥10 5 hours